Biosafety Cabinetry Certification NSF/ANSI49. Q-Trade provides test and certification services for your class II Bio-safety cabinetry to minimized hazard of working with biosafety agents, level 1-4.
BSC Test Parameter:
Electronics and Pharmaceutical using COMPRESSED AIR in their cleanroom and controlled environments require that the quality of compressed gas or air entering the environment and operating in accordance to USP 797 and ISO 14644 must be of equal or better purity then the environment it is entering.
Q-Trade CDA test engineers provide comprehensived reports on all compressed air test points tested. Tests are performed in accordance customer requirements including but not limited to USP 797, ISO 14644 and ISO 8573-7 Compressed Air Testing.
CDA Test Parameters:
Testing , adjusting and balancing your HVAC system is the only reliable way to ensure that systems are performing based on intended design. Q-Trade is a certified testing, adjusting and balancing company providing a wide range of HVAC testing, adjusting, and balancing services to achieve total system assessment, adjustment and balanced.
Basic TAB Measurements
Air System TAB Procedures:
Hydronic System TAB procedures:
Q-Trade performs Cleanroom Performance Testing in accordance with customer’s required specifications and procedures. We can performed test referenced to latest version of the ISO Standard 14644, WHO and PIC/GMP.
Cleanroom Test Parameters
Primary Test:
Secondary Test:
Leading manufacturer of temperature, humidity, atmospheric pressure, carbon dioxide CO2 transmitters, data loggers, monitoring systems, data acquisiton systems, thermometers, hygrometers, barometers.
Model: T3110
Temperature and humidity outdoor, indoor probe with 4-20mA output
Model T3510
Ambient temperature, relative humidity t-line Web sensor. Remote alarm.
Model U3430
Datalogger is designed to record temperature, humidity and CO2. In case of exceeded set limits alarms are indicated by LED, LCD and acoustically by built-in beeper.
Model U4130
Datalogger is designed to record temperature, humidity and atmospheric pressure.
The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via USB-C.
Ethernet Multilogger-Thermo hygrometer with 4Mini DIN inputs Model M1140
Universal datalogger with MiniDIN inputs for connecting up to four temperature and/or humidity probes.
Multilogger can be installed permanently to Ethernet network or work as portable device.
Included is traceable calibration certificate in accordance with EN ISO/IEC17025.
Multilogger- low cost thermometer with 4 thermocouples input Model 1200E
M1200E is a battery operated datalogger that allows to monitor the actual measured values on the device display or to work with historical data in Comet Vision, where you can create table charts, PDF export, MS EXCEL.
The device is designed for measuring and recording with 4 inputs for thermocouples K, J, S, B, T, N.
Dual Channel Thermometer Model Co121
High accuracy thermometer for Ni1000 RTD sensor.
Audio and optical alarm of measured temperature. LCD backlight. Minimum/maximum memory. Memory of minimum and maximum temperature included traceable calibration certificate.
Dual Channel Thermometer Ni1000 /Pt1000 Model D0221
Thermometer is designed for direct measurement and datalogging of temperature into the internal non-volatile memory.
Free PC program enables to transfer recorded data to the personal computer for consequent evaluation. LCD backlight.
CO2 Concentration Transmitter with 4-20mA, external probe (1M) Model T5141
CO2 – carbon dioxide level sensor.
CO2 concentration transmitter with 4-20mA output is built in a durable watertight case. Output range is user adjustable. Large dual line LCD is an advantage. Display is possible to switch off.
CO2 Datalogger with built in sensor Model U8410
Datalogger is designed to record CO2 from built-in sensor. In case of exceeded set limits alarms are indicated by LED, LCD and acoustically by built-in beeper.
The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via USB-C.
WIFI CO2 monitor with integrated probe Model: W5714
Sensors with WiFi interface are designed to measure the CO2 from integrated sensor (included in delivery).
Communication with the sensor is done via a wireless WiFi network. The device allows sending measured values to the online COMET Cloud (with the shortest interval of 5 minutes) or into COMET Database.
Ethernet Multilogger Thermohygro-CO2 with MiniDIN and 2 terminal Model m1322
Battery powered datalogger with built-in CO2 sensor and 4 universal inputs for measurement of temperature, humidity, 0-10V voltage, 0-20mA current, two-state signal and for counting pulses.
Included is traceable calibration certificate in accordance with EN ISO/IEC17025.
Particle Measuring Systems (PMS) has been the global leader in cleanroom contamination monitoring for over 45 years.
Microbial Sampler: Minicapt Mobile
Sensitivity: 1 cfu
The innovative microbial air sampler. ISO 14698:2003 compliant
Remote Air Sampler: Minicapt
Sensitivity range: 1 cfu
HEPA-filtered exhaust =no cleanroom contamination
Compressed Gas Kit for Viable Particulate Monitoring.
The Compressed Gas Kit works with the Minicap Mobile instrument to provide reliable viable contamination monitoring for process gases.
Microbial Monitor Biocapt Single Use
Sensitivity range: 1 cfu
This cleanroom microbial monitor is an innovative replacement for settle plates, provides 2 hr sampling, and minimizes false positives, resulting in a decrease in investigations.
Particle Measuring Systems remote and portable airborne particle counters for air and gas are specifically designed for controlled and cleanroom environments.
Lasair Pro
Sensitivity range: 0.3 – 25 µm
Designed for intuitive and reliable portable and remote airborne particle counting. Meets the latest data integrity requirements, positioned for future compliance.
0.1 micron Particle Counter: Lasair III 110
Sensitivity range: 0.1 – 5.0 µm
The only true .1 micron particle counter, providing real-time measurement of yield-impacting cleanroom particles with three configurations.
Airnet II Particle Sensor (4 Channel)
Sensitivity range: 0.2 – 10.0 µm
The Airnet particle sensor meets the specifications of ISO 21501-4 to measure the size and number of particles suspended in the air for real-time monitoring of defect-causing particles.
Handheld Particle Counter: Handilaz Mini II
Sensitivity range: 0.2 – 10 µm – Complete Troubleshooting from a handheld particle counter
Ergonomically designed handheld particle counter, that fits in the palm of your hand for convenient cleanroom monitoring
AM16/32 Aerosol Manifold System
Advanced Aerosol Manifold for sequentially monitoring aerosol contamination at multiple cleanroom locations with a fixed airborne particle counter.
HPGP-101-C Pressure Gas Probe
Sensitivity range: 0.1 – 5.0 µm
Provides reliable in-line contamination monitoring for process gases at line pressure
HPD III High Pressure Diffuser
Compatible with non-toxic, non-flammable gases.
Economical monitoring of non-toxic, non-flammable pressurized gases (CDA, N2, Ar, CO2) with atmospheric pressure particle counters.
HPD II High Pressure Diffuser
The HPD II Aerosol Monitoring Accessory is compatible with non-toxic, non-flammable gases such as Clean Dry Air (CDA), Argon, Nitrogen and Carbon dioxide.
Economical monitoring of non-toxic, non-flammable pressurized gases (CDA, N2, Ar, CO2) with atmospheric pressure particle counters.
Liquid particle counters are essential for critical contamination monitoring and measurement of ultrapure water and pure process chemicals within semiconductor and other precision manufacturing industries as well as water/ parenterals for Life Sciences applications
The UltraChem 40 Chemical Particle Counter from Particle Measuring Systems detects 40 nm particles in chemicals with high molecular scatter.
Liquid Particle Counter for Chemicals: Ultra Chem 100
Sensitivity range: 100 – 500 nm
The Ultrachem 100 Liquid Particle Counter gives you reliable contamination monitoring with the ability to detect particles as small as 100 nm in chemicals with high molecular scatter.
Deionized Water Particle Counter: HSLIS-50e
Sensitivity range: 0.05 – 0.2 µm
Provides continuous, real-time monitoring of contamination levels in deionized water.
LiQuilaz® II
An optical liquid particle counter is a volumetric monitor with a variety of sizing sensitivities as low as 0.2 µm. It provides high precision analysis for most process chemicals, including hydrofluoric acid and hot corrosive chemicals up to 306 °F (152 °C).
Syringe Particle Sampler: SLS Series
Uses a precision syringe and simple flow-path for delivering chemical samples from a sample vessel or chemical container, directly to the particle sensor for liquid particle counter batch sampling.
Liquid Particle Counter for USP 788: APSS2000.
Liquid particle counter for USP 788 sizes & counts suspended particles.
Corrosive Liquid Particle Sampler: CLS 700T
A compression sampler combined with a LiQuilaz® II particle counter for effective measurement of particles in fluids contained in unpressurized vessels.
UPW Flow Controller for PMS Liquid Particle Counter
FC-200 and FC-100 for UPW.
Precise and continuous control of sampler flow for ultrapure water liquid particle counters.
